CMP Home CMP Web Page Index CMP Safety web page custom shop
Safety

Donate to CMP

For Email Marketing you can trust





Find us on FacebookFollow ODCMP on Twitter

CMP Custom Shop

 

The CMP Custom Shop will be closed 2 July – 27 July 2014. The CMP Armorers will be traveling to Camp Perry to support the National Matches and CMP Games Events. The Custom Shop personnel will not be available by phone but you may still contact them via email at customshop@thecmp.org

Customers may still request a Return Authorization # via email but please note that there will be a slight delay in the CMP Custom Shop during this period.  Thank you!

The CMP Custom Shop will officially open for business on October 1, 2013. The CMP Custom Shop will provide a wide variety of repair, upgrade and custom services for a wide range of U.S. Military rifles, specifically those issued in early eras. Customers should expect the CMP Custom Shop to continue the CMP traditions we are known for: customer service, quality and reasonable turnaround for most work.

What type of Rifles will the CMP Custom Shop work on?

PartsCMP will specialize in working on the M1Garand, M1 Carbine, 1903 and 1903A3 Springfield, the 1917 Enfield and the Krag. Other rifles like the Remington 40X, Mossberg 44 and H&R Model 12 can also be serviced if needed. CMP will NOT be working on shotguns, pistols, revolvers, M14/M1A, AR15 style rifles or other commercially-produced modern rifles.

The CMP Custom Shop can work on rifles that may have been purchased elsewhere as long as they were made by a USGI contractor. Some examples include: Springfield Armory (not Springfield Inc.), Harrington & Richardson, Winchester, International Harvester, Remington, Rock Island, Eddystone, Inland, Underwood, Rock-Ola, Quality Hardware, National Postal meter, Standard Products, IBM, Irwin-Pederson and Saginaw. There are many NON-USGI copies of the M1 Garand, 1903 Springfield and especially the M1 Carbine that CMP will be unable to work on.

What services will the CMP Custom Shop provide?

The CMP Custom Shop will be able to perform virtually any normal upgrading, accurizing, customizing and refinishing (not to mention regular repairs and troubleshooting) to the types of rifles that we are currently selling or have sold in the recent past. Below is a list of current services provided. If you would like a service not listed, please email armorers@thecmp.org to see if they can fillful your request.

What are the hours and location of the CMP Custom Shop? 

The CMP Custom Shop is open Monday – Friday, 8:00AM – 3:00PM. Directions to the Custom Shop are:

From Birmingham-
Take I20 East to Anniston/Oxford exit 188. At exit 188 turn left onto Golden Springs Rd. and drive about 1.5 miles to a traffic light intersection with Greenbriar Dear Rd. (a McDonalds is there on the left). Turn left onto Greenbriar Dear Rd. and drive 1 mile to the next traffic light,  turn left there onto Coleman Rd.. Drive 0.3 miles to our building on the left, look for a small sign on a post “CMP Custom Shop” that identifies the correct entrance to our parking lot. Follow signs on the fence to find the Custom Shop entrance. The building has a big “1803” above the front door but the Custom Shop entrance is around the side on the left.

From Atlanta-
Take I20 West to Anniston/Oxford exit 188. At exit 188 turn right onto Golden Springs Rd. and drive about 1.5 miles to a traffic light intersection with Greenbriar Dear Rd. (a McDonalds is there on the left). Turn left onto Greenbriar Dear Rd. and drive 1 mile to the next traffic light, turn left there onto Coleman Rd.. Drive 0.3 miles to our building on the left, look for a small sign on a post “CMP Custom Shop” that identifies the correct entrance to our parking lot. Follow signs on the fence to find the Custom Shop entrance. The building has a big “1803” above the front door but the Custom Shop entrance is around the side on the left.

 

  • Services for the M1 Garand
  • Services for the M1 Carbine
  • Services for the 1903A3
  • Services for the 1903 Springfield
  • Services for the 1917 Enfield (30-06 only)
  • Services for Krag (Rifle and Carbine)

Services for the M1 Garand

Item # Description Price
CS165 Basic barrel Installation and Headspace (Price shown is for labor only and does not include the cost of the barrel. See CMP Custom Shop Inventory list for current barrels available.)This service includes the removal of the old barrel and installation of a new barrel. The chamber will be finish reamed to give proper headspace within military specifications. Applicable for standard length and contour .308 and 30-06 barrels. The take off barrel will be returned unless directed otherwise. Used GI barrels can also be installed but due to high headspace failure rate, fee will apply whether successful or not. Barrels in .308 will require the purchase of our nylon filler block spacer(item number NLU PC008). $75
CS165.5 Delux barrel installation (Price shown is for labor only and does not include the cost of the barrel. See CMP Custom Shop Inventory list for current barrels available.) Includes everything in CS165 with the addition of precision bolt lapping. $100
CS166 Krieger match barrel installation (Price shown is for labor only and does not include the cost of the barrel. See CMP Custom Shop Inventory list for current barrels available.) This barrel installation includes: lapping the bolt lugs and precision lathe chambering, crowning and headspacing. Requires the purchase of one of our Krieger barrels or customer provided barrel. Please specify either 30-06 or .308 chambering. Barrels in .308 will require the purchase of our nylon filler block spacer (item number NLU PC008). $200
CS166.5

Krieger HEAVY match barrel install (BARREL NOT INCLUDED)
This barrel installation includes: lapping the bolt lugs and precision lathe
chambering, crowning and head spacing. The installation also requires the
modification of the gas cylinder (not NM), the opening up of the stock channel for clearance and the routing out of the rear hand guard so it can be installed at no additional charge. The purchase of one of our Heavy Krieger Barrels (part number NLU-CSM1BBL) or customer provided Barrel is also required. Please specify either 30-06 or .308 Win chambering. Barrels in .308 will require the purchase of our spacer (part number NLU-PC008).

                       
$250
CS100 Gas cylinder assembly refinish
This service includes applying a blackening oxidizer to a Garand gas cylinder, lock and lock screw (the three stainless steel parts on a Garand), this finish replicates the original finish applied to post war  components.  If you have a  stacking swivel and a front sight mounted, they can be refinished with the gas cylinder (no extra
charge) so removal is unnecessary. Remember that the front sight and stacking swivel will not be parkerized but rather blackened with the oxidizer which is similar in appearance to Parkerizing but darker.                         
$35
CS101 Rifle metal refinish-Parkerize all metal parts
This service includes the disassembly of the rifle, surface preparation and the parkerizing of the metal parts. Rifle will be reassembled and function fired. It is important to note that the exact color or tint of the finish will vary depending on the type and hardness of the steel, but it will generally be a medium gray.(Removal of pitting is not included). The stainless steel components will go through a finish process specifically for stainless steel.
$100
CS102 Fit new stock to existing rifle, return old wood (Price shown is for labor only and does not include the cost of the stock. See CMP Custom Shop Inventory list for current stocks available.)
This service includes the removal of the old stock and transfer of the stock hardware from the old stock to the new stock if needed. We will also make sure the hand guards have appropriate clearances and the trigger group lock-up is properly tight, but not too tight.
$35
CS103 Stock set refinish-standard
This service includes the removal of the old finish/surface oil, sanding as necessary to remove minor surface blemishes. Special attention is given to maintaining the sharp edges and stock contours. Application of a military color stain and hybrid tung oil matt finish sealer is included. Repairs and special needs will be quoted before performing the work.
$85
CS105 Epoxy bed/Glass bed
This service includes epoxy bedding the action using acraglas gel bedding compound but does not include floating the front hand guard. (see Work Code CS106)
$175
CS106 Float the front hand guard
This is a fragile modification and not recommmended for everyone. This service is only available in conjunction with either type of receiver bedding listed above. This work includes knurling the barrel where the lower band fits as well as permanently affixing the front hand guard to the lower band and creating clearance between the hand guard and the barrel.
$75
CS106.5 NM modification of the gas cylinder
This modification increases clearance between the rear of the gas cylinder andboth the barrel and front hand guard, typically done as part of a complete NM conditioning. This specific modification is now legal in CMP As-Issued" matches. National match front sight not included.
$50
CS107 Op rod overhaul or exchange (labor and parts)
This service includes the replacement of the piston and the reconstruction of the tab that rides in the receiver channel. Straightening and reparkerizing is also included. Due to the time it takes to have an op rod rebuilt, we offer an exchange program where our armorers can exchange your rebuildable op rod for one that has already been rebuilt for the same price. Op rods sent to the CMP that cannot be rebuilt will not be eligible for exchange.
$75
CS108 Full National Match upgrade package (NO PARTS INCLUDED)
This package includes the following work codes: CS104 or 105, CS106, CS106.5, CS109, CS111, and either CS110 or 110.5. Also includes barrel spline peening to tighten the fit of the gas cylinder on the barrel as well as careful assembly and fitment of all parts.
$400
CS109 Trigger clean up, remove creep, 4.5 lb+
This service includes the removal of all noticable creep but maintains a crisp military two stage trigger pull and a trigger weight of at least 4.5 lb.. Reducing the weight of the trigger pull is not the objective of this service.
$40
CS110 NM front and rear sight installation (SIGHTS NOT INCLUDED)
This service simply includes the labor to install and properly set up NM front and rear sight assembles Requires the purchase of item numbers NLU 091 (NM front sight - $40.00) and NLU 092 (NM rear sight - $225.00) or customer provided sight assembly.
$25
CS110.5 NM 1/2 minute rear sight upgrade (HOODED APERTURE NOT INCLUDED)
This service includes the modification of the receiver and windage knob to provide 1/2 minute windage adjustment. Customer must also purchase our hooded rear sight aperture and front sight assembly, item numbers NLU 091 (NM front sight - $40.00) provide one for us to use or provide equivalent parts for us to use.
$50
CS111 Sight in, 100 yd. zero (WE SUPPLY AMMO)
This service includes a 100 yard off the bench sight in by one of our staff. A target will be included. Not a necessity but this will show real world accuracy potential and get you on target.
$50
CS112 General Technical Inspection (NO PARTS INCLUDED)
This service includes full disassembly and cleaning of your rifle. Full inspectionand gauging of parts. An inspection report will be provided giving the customer information about the condition of the rifle.
$45
MISCLAB
General repair labor, by the half hour
$25

Services for the M1 Carbine

Item # Description Price
CS265 Barrel Installation and Headspace (Price shown is for labor only and does not include the cost of the barrel. See CMP Custom Shop Inventory list current barrels available.) This service includes the removal of the old barrel and installation of a new barrel. The chamber will be finish reamed to give proper headspace within military specifications. Applicable for standard barrels in .30 carbine. Rifle will be function fired. The take off barrel will be returned unless directed otherwise. Used GI barrels can also be installed but due to high headspace failure rate, fee will apply whether successful or not. $75
CS201 Rifle metal refinish-Parkerize all metal parts.
This service includes the disassembly of the rifle, surface preparation and the parkerizing of the metal parts. Rifle will be reassembled and function fired. It is important to note that the exact color or tint of the finish will vary depending on the type and hardness of the steel, but it will generally be a medium gray.(Removal of pitting is not included).
$100
CS202 Fit new stock to existing rifle, return old wood (Price shown is for labor only and does not include the cost of the stock. See CMP Custom Shop Inventory list for current stocks available.) This service includes the removal of the old stock and transfer of the stock hardware from the old stock to the new stock if needed. We will also make sure the hand guard fits properly. $35
CS203 Stock set refinish-standard
This service includes the removal of the old finish/surface oil, sanding asnecessary to remove minor surface blemishes. Special attention is given to maintaining the sharp edges and stock contours. Application of a military color stain and application of a hybrid tung oil matt finish sealer is included. Repairs and special needs will be quoted before performing the work.
$85
CS207 Slide overhaul or exchange
This service includes the reconstruction of the tab that rides in the receiver channel. Straightening and reparkerizing is also included as needed. Due to the time it takes to have a slide rebuilt, we offer an exchange program where our armorers can exchange your rebuildable slide for one that has already been rebuilt for the same price.
$45
CS208 General Technical Inspection (NO PARTS INCLUDED)
This service includes full disassembly and cleaning of your rifle. Full inspection and gauging of parts. An inspection report will be provided giving the customer information about the condition of the rifle.
$45
CS209 Trigger clean up, remove creep, 4.5 lb+
This service includes the removal of as much noticable creep as possible but maintains a military two stage trigger pull and a trigger weight of at least 4.5 lb. Reducing the weight of the trigger pull is not the objective of this service.
$75
CS211 Sight in, 100 yd. zero
This service includes a 100 yard off the bench sight in by one of our staff. A target will be included. Not a necessity but this will show real world accuracy potential and get you on target.
$50
MISCLAB
General repair labor, by the half hour
$25

 

 

Services for the 1903A3

Item # Description Price
CS365 Barrel Installation and Headspace (Price shown is for labor only and does not include the cost of the barrel. See CMP Custom Shop Inventory list for current barrels available.) This service includes the removal of the old barrel and installation of a new barrel. The chamber will be finish reamed to give proper headspace within military specifications. Applicable for standard barrels in 30-06. Rifle will be function fired. The take off barrel will be returned unless directed otherwise. New and used GI barrels can also be installed, but due to high headspace failure rate, fee will apply whether successful or not. $75
CS366 Delux barrel installation (Price shown is for labor only and does not include the cost of the barrel. See CMP Custom Shop Inventory list for current barrels available.) Includes everything in CS365 with the addition of precision bolt lapping, truing of front receiver ring and bolt face. $150
CS301 Rifle metal refinish-Parkerize all metal parts (suggested)
This service includes the disassembly of the rifle, surface preparation and the parkerizing of the metal parts. Rifle will be reassembled and function fired. It is important to note that the exact color or tint of the finish will vary depending on the type and hardness of the steel, but it will generally be a medium gray.(Removal of pitting is not included).
$100
CS302 Rifle metal refinish-Matte Blue all metal parts
This service includes the disassembly of the rifle, surface preparation and the bluing of the metal parts. The metal finish will be a dark blue/black and have a matte or no gloss appearance (Removal of pitting is not included). Rifle will be reassembled and function fired.
$130
CS303 Rifle metal refinish-Polish blue all metal parts
This service includes the disassembly of the rifle, surface preparation and the bluing of the metal parts. The metal finish will be a dark blue and the outward surfaces of most parts will have a polished blue appearance wherepossible (Removal of pitting is not included). Rifle will be reassembled and function fired.
$175
CS304 Fit new stock to existing rifle, return old wood (Price shown is for labor only and does not include the cost of the stock. See CMP Custom Shop Inventory list for current stocks available.)
This service includes the removal of the old stock and transfer of the stock hardware from the old stock to the new stock if needed. Our procedure for proper fitting for competition use and maximizing stock life is time consuming and highly recommended. Some reshaping of the stock and hand guard are required and some touch up of the stain and finish should be expected.
$150
CS305 Stock set refinish-standard
This service includes the removal of the old finish/surface oil, sanding as necessary to remove minor surface blemishes. Special attention is given to maintaining the sharp edges and stock contours. Application of a military color stain and application of a hybrid tung oil matte sealing finish is included. Repairs and special needs will be quoted before performing the work.
$85
CS306 Turn down bolt handle for scope clearance (O3A4 style) (LABOR ONLY)
This service includes modifying a customer supplied bolt (only Remington) for scope clearance as required on a reproduction O3A4 with an M84 scope.The modified bolt will not be exactly like an A4 bolt but will be very similar. Reparkerizing of the bolt following the modifications is included.
$100
CS307 Drilling, tapping and mounting scope base (O3A4 type)(BASE NOT INCLUDED)
This service includes the installation of a customer supplied 03A4 scope base including drilling and tapping of the receiver, alignment of the rings and bore sighting of the scope.
$100
CS308 Modify stock for bolt handle clearance (similar to O3A4) (LABOR ONLY)
This service includes the modification of the stock to provide clearance for a 03A4 style bolt handle. Stain and finish of the modified area is included.
$35
CS309 Trigger clean up, remove creep, 3.5 lb+
This service includes the removal of all noticable creep but maintains a crisp military two stage trigger pull and a trigger weight of at least 3.5 lb. Reducing the weight of the trigger pull is not the objective of this service.
$40
CS310 Install support clips to reproduction hand guard (LABOR ONLY)
This service includes the modification of a reproduction hand guard and installation of customer supplied GI support clips. This makes the reproduction hand guard look just like a GI hand guard.
$20
CS311 Sight in, 100 yd. zero
This service includes a 100 yard off the bench sight in by one of our staff. A target will be included. Not a necessity but this will show real world accuracy potential and get you on target.
$50
MISCLAB
General repair labor, by the half hour
$25

 

Services for the 1903 Springfield

Item # Description Price
CS465

Barrel Installation and Headspace (Price shown is for labor only and does not include the cost of the barrel. See CMP Custom Shop Inventory list for current barrels available.) This service includes the removal of the old barrel and installation of a new barrel. The chamber will be finish reamed to give proper headspace within military specifications. The transfer of the rear sight base from the old to the new barrel makes this a more time consuming procedure than for the 03A3. Applicable for standard barrels in 30-06. Rifle will be function Fired. The take off barrel will be returned unless directed otherwise. Customer owned barrels can also be installed, call for more information and pricing.

$150
CS466

Delux barrel installation (Price shown is for labor only and does not include the cost of the barrel. See CMP Custom Shop Inventory list for current barrels available.) Includes everything in CS365 with the addition of precision bolt lapping, truing of front receiver ring and bolt face.

$225
CS401

Rifle metal refinish-Parkerize all metal parts
This service includes the disassembly of the rifle, surface preparation and the parkerizing of the metal parts. Rifle will be reassembled and function fired. It is important to note that the exact color or tint of the finish will vary depending on the type and hardness of the steel, but it will generally be a medium gray.(Removal of pitting is not included).

$100
CS402

Rifle metal refinish-Matte Blue all metal parts
This service includes the disassembly of the rifle, surface preparation and the bluing of the metal parts. The metal finish will be a dark blue/black and have a matte or no gloss appearance (Removal of pitting is not included). Rifle will be reassembled and function fired.

$130.
CS403

Rifle metal refinish-Polish blue all metal parts
This service includes the disassembly of the rifle, surface preparation and the bluing of the metal parts. The metal finish will be a dark blue and the outward surfaces of most parts will have a polished blue appearance where possible (Removal of pitting is not included). Rifle will be reassembled and function fired.

$175
CS404

Fit new stock to existing rifle, return old wood (Price shown is for labor only and does not include the cost of the stock. See CMP Custom Shop Inventory list for current stocks available.) This service includes the removal of the old stock and transfer of the stock hardware from the old stock to the new stock if needed. Our procedure for proper fitting for competition use and maximizing stock life is time consuming and highly recommended. Some reshaping of the stock and hand guard are required and some touch up of the stain and finish should be expected.

$150
CS405

Stock set refinish-standard
This service includes the removal of the old finish/surface oil, sanding as necessary to remove minor surface blemishes. Special attention is given to maintaining the sharp edges and stock contours. Application of a military color stain and application of a hybrid tung oil type matte sealing finish is included. Repairs and special needs will be quoted before performing the work.

$85
CS406

Turn down bolt handle for scope clearance (O3A4 style) (BOLT NOT INCLUDED)
This service includes modifying a customer supplied Remington (only Remington)bolt for scope clearance as required on a reproduction 1941 type sniper rifle with an M84 scope or similar. The modified bolt will be similar to an A4 bolt. Reparkerizing the bolt following the modifications is included.

$100
CS407

Drilling, tapping and mounting scope bases (1941 type) (BASE NOT INCLUDED)
This service includes the proper positioning and attachment of customer supplied bases needed for the installation of a Unertl style scope that is legal for the CMP Vintage Sniper Match.

$100
CS408

Modify stock for bolt handle clearance (similar to O3A4) (LABOR ONLY)
This service includes the modification of the stock to provide clearance for a 03A4 style bolt handle. Stain and finish of the modified area is included.

$35
CS409

Modify handguard to clear scope base (1941 type) (HAND GUARD NOT INCLUDED)
This service includes the exterior contouring and creation of a clearance hole for the front scope base, Stain and finish of the modified area is included.

$35
CS410

Trigger clean up, remove creep, 3.5 lb+
This service includes a simple removal of all noticable creep but maintains a crisp military two stage trigger pull and a trigger weight of at least 3.5 lb. Reducing the weight of the trigger pull is not the objective of this service.

$40
CS411

Install support clips on repro hand guard (CLIPS AND HAND GUARD NOT INCLUDED)
This service includes the modification of a reproduction hand guard and installation of customer supplied GI support clips. This makes the reproduction hand guard look just like a GI hand guard.

$25
CS412

Sight in, 100 yd. zero
This service includes a 100 yard off the bench sight in by one of our staff. A target will be included. Not a necessity but this will show real world accuracy potential and get you on target.

$50
MISCLAB
General repair labor, by the half hour
$25

 

Services for the 1917 Enfield (30-06 only)

Item # Description Price
CS565

Standard barrel Installation and Headspace (Price shown is for labor only and does not include the cost of the barrel. See CMP Custom Shop Inventory list for current barrels available.)
This service includes the removal of the old barrel and installation of a new barrel. The chamber will be finish reamed to give proper headspace within military specifications. Applicable for standard barrels in 30-06. Rifle will be function fired. The take off barrel will be returned unless directed otherwise.

$100
CS566

Delux barrel installation (Price shown is for labor only and does not include the cost of the barrel. See CMP Custom Shop Inventory list for current barrels available.) Includes everything in CS365 with the addition of precision bolt lapping, truing of front receiver ring and bolt face.

$175
CS501

Rifle metal refinish-Parkerize all metal parts
This service includes the disassembly of the rifle, surface preparation and the parkerizing of the metal parts. Rifle will be reassembled and function fired. It is important to note that the exact color or tint of the finish will vary depending on the type and hardness of the steel, but it will generally be a medium gray.(Removal of pitting is not included).

$100
CS502

Rifle metal refinish-Matte Blue all metal parts (suggested)
This service includes the disassembly of the rifle, surface preparation and the bluing of the metal parts. The metal finish will be a dark blue/black and have a matte or no gloss appearance (Removal of pitting is not included). Rifle will be reassembled and function fired.

$130
CS503

Rifle metal refinish-Polish blue all metal parts
This service includes the disassembly of the rifle, surface preparation and the bluing of the metal parts. The metal finish will be a dark blue and the outward surfaces of most parts will have a polished blue appearance where possible (Removal of pitting is not included). Rifle will be reassembled and function fired.

$175
CS504

Stock set refinish-standard
This service includes the removal of the old finish/surface oil, sanding as necessary to remove minor surface blemishes. Special attention is given to maintaining the sharp edges and stock contours. Application of a military color stain and application of a hybrid tung oil type matt sealing finish is included. Repairs and special needs will be quoted before performing the work.

$85
CS505

Trigger clean up, remove creep, 3.5 lb+
This service includes the removal of all noticable creep but maintains a crisp military two stage trigger pull and a trigger weight of at least 3.5 lb. Reducing the weight of the trigger pull is not the objective of this service.

$40
CS506

Sight in, 100 yd. zero
This service includes a 100 yard off the bench sight in by one of our staff. A target will be included. Not a necessity but this will show real world accuracy potential and get you on target.

$50
MISCLAB

General repair labor, by the half hour

$25

 

Services for Krag (Rifle and Carbine)

Item # Description Price
CS665

Standard barrel Installation and headspace (Price shown is for labor only and does not include the cost of the barrel. See CMP Custom Shop Inventory list for current barrels available.) This service includes the removal of the old barrel and installation of a new barrel. The chamber will be finish reamed to give proper headspace within military specifications. Applicable for standard barrels in 30-40 Krag. Rifle will be function fired. The take off barrel will be returned unless directed otherwise. Includes the transfer of the front sight base from the old barrel to the new.

$125
CS601

Rifle metal refinish-Parkerize all metal parts
This service includes the disassembly of the rifle, surface preparation and the parkerizing of the metal parts. Rifle will be reassembled and function fired.It is important to note that the exact color or tint of the finish will vary depending on the type and hardness of the steel, but it will generally be a medium gray.(Removal of pitting is not included).

$100
CS602

Rifle metal refinish-Matte Blue all metal parts (suggested)
This service includes the disassembly of the rifle, surface preparation and the bluing of the metal parts. The metal finish will be a dark blue/black and have a matte or no gloss appearance (Removal of pitting is not included). Rifle will be reassembled and function fired.

$130
CS603

Rifle metal refinish-Polish blue all metal parts
This service includes the disassembly of the rifle, surface preparation and the bluing of the metal parts. The metal finish will be a dark blue and the outward surfaces of most parts will have a polished blue appearance where possible (Removal of pitting is not included). Rifle will be reassembled and function fired.

$175
CS604

Stock set refinish-standard
This service includes the removal of the old finish/surface oil, sanding as necessary to remove minor surface blemishes. Special attention is given to maintaining the sharp edges and stock contours. Application of a military color stain and application of a hybrid tung oil type matt sealing finish is included. Repairs and special needs will be quoted before performing the work.

$85
CS605

Trigger clean up, remove creep, 3.5 lb+
This service includes the removal of all noticable creep but maintains a crisp military two stage trigger pull and a trigger weight of at least 3.5 lb. Reducing the weight of the trigger pull is not the objective of this service.

$50
CS606

Sight in, 100 yd. zero
This service includes a 100 yard off the bench sight in by one of our staff. A target will be included. Not a necessity but this will show real world accuracy potential and get you on target.

$50
MISCLAB

General repair labor, by the half hour

$25

 


What Items are available from CMP Custom Shop Inventory List?

These items are generally in CMP inventory at all times.  In the instance, one of the items listed is out of stock, a Custom Shop representative will contact the customer to resolve.

NLU/ITEM DESCRIPTION PRICE
065CRI/03
Barrel, New Criterion 1903
$189.95
065CRI/1917
Barrel, New Criterion 1917
$189.95
065CRI/3040C
Barrel, New Criterion 30-40 Carbine
$199.95
065CRI/3040R
Barrel, New Criterion 30-40 Rifle
$199.95
065CRI/308
Barrel, New Criterion .308 M1 Garand
$189.95
065CRI/A3
Barrel, New Criterion 1903A3
$189.95
065CRI/CARBINE
Barrel, New Criterion Carbine
$189.95
065CRI/M1
Barrel, New Criterion M1 Garand
$179.95
082
CMP M1 Garand Stock Set New Manufacture Wood Only
$118.95
082M
CMP M1 Garand Stock set new manufacture w/metal
$149.95
083M
M1 Carbine Stock & Hand guard set w/ metal
$144.95
O84
M1 Garand Stock set unfinished
$118.95
O86
1903 Stock set "C" Stock configuration
$164.95
O87
1903A3 Stock set "C" Stock configuration
$164.95
O88
1903 "S" Stock set
$164.95
O91
M1 NM Front Sight Set Complete
$40.00
O92
M1 NM Rear Sight Set Complete
$225.00
093
M1 NM hooded aperture w/.0595 aperture hole
$39.95
854WEB
Sling, M1 Garand, cotton, new manufacture
$9.95
PC008
Nylon Filler Block Spacer for .308 Garand
$14.95
PS49
New production quality replacement operating rod spring
$13.00
CSM1BBLGI
M1 Garand Krieger BBL GI Contoured 
$350.00
CSM1BBL
M1 Garand Heavy Barrel
$380.00

Who is eligible to use the CMP Custom Shop?

Those wishing to use the CMP Custom Shop must be a customer on file in the CMP system. Customers must meet the same eligibility requirements as for rifle purchases from the CMP.

How do I begin the process to ship my rifle to the CMP Custom Shop?

To begin the process of returning a rifle to the CMP Custom Shop, customers must first complete the “CMP Custom Shop Request Form” and print a copy. (FILLABLE FORM) After filling out the form completely, make sure a copy is placed in the box/case with the rifle so CMP will know who it’s from and what modifications are requested.

Then customers must contact the CMP Custom Shop Clerk to provide details of their shipment and request form. Please email customshop@thecmp.org or call (256) 835-8455, ext. 1113. Once the CMP Custom Shop Clerk has recorded your request, they will provide you with a Return Authorization #. The Return Authorization # must be located on the top of the CMP Custom Shop Request Form and on the outside of the shipping box so CMP can verify the shipment when it arrives.

Finally, customers must also fill out the CMP Order Form and include completed forms in their shipment. The CMP will not conduct a NICS background check but still requires a signature on Page 2A of the CMP Order Form. IMPORTANT: If your State or locality requires you to first obtain a license, permit, or Firearms Owner ID card in order to possess or receive a rifle, you must enclose a photocopy of your license, permit, or card with the application for purchase.

What is the cost of Shipping & Handling?

Customers are responsible for shipping expenses when sending items to CMP. Standard CMP shipping charges apply for the shipping of the rifle or other items back to the customer. The current rifle shipping rate is $24.95. The shipping charge for barrels, receivers or parts is $9.95. If you would like a Fed Ex label sent to you, please let the Custom Shop Clerk know when you receive your Return Authoriation #. You will be billed $29.95 to have the shipping label mailed to you.

Where do I ship my rifle once I have completed the CMP Custom Shop Request Form, CMP Order Form and received my Return Authorization #?

The CMP Custom Shop shipping address is not the same as the regular CMP shipping address. Correspondence and items for the CMP Custom Shop must be shipped to:
                                    CMP Custom Shop
                                    1803 Coleman Rd
                                    Anniston, AL 36207

When shipping your rifle to the CMP Custom Shop, please make sure the rifle is completely unloaded (do not send any
ammunition with the rifle, spent cases are okay).

What if I have a current order the CMP is processing or if I want to place a rifle order and want the CMP Custom Shop to make modifications prior to shipping the rifle?

If a customer wishes to purchase a rifle from the CMP and have the CMP Custom Shop make modifications to it prior to shipping, that can be done by adding the desired work and Item #'s to the order form page 3A along with the rifle desired.

If a customer has an existing order with the CMP, please contact the Custom Shop Clerk at customshop@thecmp.org or call (256) 835-8455, ext. 1113, to modify your order and add the desired work and item #'s to the order form.

FOR MORE INFORMATION. If you want more information about CMP Custom Shop, please contact the Custom Shop at customshop@thecmp.org or call (256) 835-8455, ext. 1113.
           



 
 
 
 
© 2013 Civilian Marksmanship Program  About Us Contact Us 
Privacy Statement